normal_mapping.rasm

src/5.advanced_lighting/4.normal_mapping/normal_mapping.rasm · 176 lines

; 4. Normal mapping
;
; Lighting depends on the normal, so a flat wall lit with its one flat normal
; looks flat whatever its texture shows. A normal map stores a normal per
; texel instead (the bluish image: xyz packed into rgb), so every brick and
; every mortar groove catches the light on its own.
;
; The map's normals are in tangent space: z out of the surface, x along u, y
; along v. (The files are made for GL, which shows them upside down, so their
; +y points down the image as they sit, the way v runs.) That keeps one map
; valid however the surface is turned. The vertex shader builds the three axes
; in world space, tangent, bitangent and normal (TBN), and the pixel shader
; turns the map's normal into world space through them before lighting as
; usual. create_wall (includes/learn/wall.rasm) computes the tangent from how
; position and uv change along the triangle's edges.
;
;   Tab   normal map on / off
import "../../../includes/d3d11.rin"
import "../../../includes/calls.rasm"
import "../../../includes/math.rasm"
import "../../../includes/learn/window.rasm"
import "../../../includes/learn/shader.rasm"
import "../../../includes/learn/gpu.rasm"
import "../../../includes/learn/cube.rasm"
import "../../../includes/learn/camera.rasm"
import "../../../includes/learn/transforms.rasm"
import "../../../includes/learn/srgb.rasm"
import "../../../includes/learn/wall.rasm"

; Mirrors `cbuffer light` in normal_mapping.hlsl.
light_constants: struct = {
    position: vec3
    use_map: u32
}

camera_start: const vec3 = { 0.0, 0.0, 3.0 }
y_axis: const vec3 = { 0.0, 1.0, 0.0 }
clear_color: [4]const f32 = { 0.1, 0.1, 0.1, 1.0 }
lamp_color: const vec4 = { 1.0, 1.0, 1.0, 1.0 }

t: transforms = {}
light: light_constants = { .position = { .z = 0.6 } }   ; z stays; x and y wander
model: mat4 = {}
s: shader = {}
lamp_shader: shader = {}
cam: camera = {}
cube_vb: *ID3D11Buffer = {}
wall_vb: *ID3D11Buffer = {}
transforms_buffer: *ID3D11Buffer = {}
light_buffer: *ID3D11Buffer = {}
lamp_buffer: *ID3D11Buffer = {}
sampler: *ID3D11SamplerState = {}
maps: [2]*ID3D11ShaderResourceView = {}
wall_vertex_stride: u32 = WALL_STRIDE
wall_offset: u32 = 0

; timing
current_frame: f32 = 0.0
delta_time: f32 = 0.0
last_frame: f32 = 0.0

main: proc() -> i32 = {
    sub rsp, 56                            ; IASetVertexBuffers takes 6: 32 + 16, draw_vertices 5: 32 + 8; entry 8 + 56 lands on 16

    invoke(window_create, "LearnD3D11  (Tab: normal map on / off)")
    ; The back buffer is viewed as sRGB: what the shaders write is linear, and
    ; the view gamma-encodes it on the way in (5.2).
    call window_use_srgb
    call window_create_depth

    invoke(create_sampler, D3D11_FILTER.D3D11_FILTER_ANISOTROPIC, D3D11_TEXTURE_ADDRESS_MODE.D3D11_TEXTURE_ADDRESS_WRAP)
    mov sampler, rax
    vcall(context, ID3D11DeviceContextVtbl.PSSetSamplers, 0, 1, sampler&)

    ; build and compile shaders
    ; -------------------------
    invoke(shader_create, s&, "src/5.advanced_lighting/4.normal_mapping/normal_mapping.hlsl", wall_layout&, WALL_LAYOUT_COUNT)
    invoke(shader_create, lamp_shader&, "src/5.advanced_lighting/4.normal_mapping/light_cube.hlsl", cube_layout&, CUBE_LAYOUT_COUNT)

    ; set up vertex data and textures
    ; -------------------------------
    invoke(create_buffer, D3D11_BIND_FLAG.D3D11_BIND_VERTEX_BUFFER, cube_vertices&, sizeof(cube_vertices))
    mov cube_vb, rax
    call create_wall
    mov wall_vb, rax
    invoke(create_constant_buffer, sizeof(transforms))
    mov transforms_buffer, rax
    invoke(create_constant_buffer, sizeof(light_constants))
    mov light_buffer, rax
    invoke(create_constant_buffer, sizeof(vec4))
    mov lamp_buffer, rax
    ; the bricks' colours (sRGB) and their normals (data, linear)
    invoke(filesystem_path, "resources/textures/brickwall.jpg")
    invoke(load_texture, rax, 1)
    mov maps[0], rax
    invoke(filesystem_path, "resources/textures/brickwall_normal.jpg")
    invoke(load_texture, rax, 0)
    mov maps[1], rax

    lea rcx, cam
    lea rdx, camera_start
    movss xmm2, -90.0                      ; yaw
    xorps xmm3, xmm3                       ; pitch 0
    call camera_create

  render_loop:
    call window_poll
    test eax, eax
    jz render_loop_done

    ; per-frame time logic
    call get_time
    movss current_frame, xmm0
    movss xmm1, xmm0
    subss xmm0, last_frame
    movss delta_time, xmm0
    movss last_frame, xmm1

    invoke(camera_process_input, cam&, delta_time&)
    ; mode 0 uses the normal map, mode 1 the flat normal
    invoke(window_mode, 2)
    mov ecx, 1
    sub ecx, eax
    mov light.use_map, ecx

    invoke(window_begin, clear_color&)
    vcall(context, ID3D11DeviceContextVtbl.IASetPrimitiveTopology, D3D11_PRIMITIVE_TOPOLOGY.D3D11_PRIMITIVE_TOPOLOGY_TRIANGLELIST)
    invoke(bind_constants, 0, transforms_buffer)
    invoke(transforms_from_camera, t&, cam&)

    ; the light wanders in front of the wall: (0.8 cos t, 0.8 sin 1.3t, 0.6)
    movss xmm0, current_frame
    call cosf
    mulss xmm0, 0.8
    movss light.position.x, xmm0
    movss xmm0, current_frame
    mulss xmm0, 1.3
    call sinf
    mulss xmm0, 0.8
    movss light.position.y, xmm0
    invoke(update_buffer, light_buffer, light&, sizeof(light_constants))
    invoke(shader_use, s&)
    invoke(bind_constants, 1, light_buffer)
    vcall(context, ID3D11DeviceContextVtbl.PSSetShaderResources, 0, 2, maps&)

    ; the wall turns a little, back and forth: rotate(radians(-25) sin(0.4 t), y)
    movss xmm0, current_frame
    mulss xmm0, 0.4
    call sinf
    mulss xmm0, -25.0
    call radians
    movaps xmm1, xmm0                      ; the angle, the second argument
    lea rcx, t.model
    lea r8, y_axis
    call m4_rotate
    invoke(m4_normal_matrix, t.normal_matrix&, t.model&)
    invoke(update_buffer, transforms_buffer, t&, sizeof(transforms))
    vcall(context, ID3D11DeviceContextVtbl.IASetVertexBuffers, 0, 1, wall_vb&, wall_vertex_stride&, wall_offset&)
    vcall(context, ID3D11DeviceContextVtbl.Draw, 6, 0)

    ; the lamp
    invoke(update_buffer, lamp_buffer, lamp_color&, sizeof(vec4))
    invoke(shader_use, lamp_shader&)
    invoke(bind_constants, 1, lamp_buffer)
    lea rcx, model
    lea rdx, light.position
    movss xmm2, 0.05
    call m4_translate_scale
    invoke(draw_vertices, transforms_buffer, t&, cube_vb, 36, model&)

    call window_present
    jmp render_loop
  render_loop_done:

    invoke(ExitProcess, 0)
}
Part of rasm-dx11, LearnOpenGL's lessons rewritten for Direct3D 11 in rasm. Licensed CC BY-NC 4.0, after LearnOpenGL by Joey de Vries.